Custom Roman Shades from Your Fabric, Sewing Service/Seamstress, Functional Flat Roman Shades from Your Material, Blackout Roman Shade
Regular price
$207.00
Regular price
Sale price
$207.00
Unit price
per
Couldn't load pickup availability
Do you already have the perfect fabric picked out and you need someone to sew it all together? We can manufacture beautiful custom Roman Shades from your own fabrics.
All notions are included in the listing price. We just need fabric from you, and the rest is on us.
Our Linden Studio (former Linen Duet) sewing workshop is located in Maryland, US, and our team of seamstresses has years of experience sewing custom curtains and draperies for clients large and small.
Price includes sewing of ONE Roman Shade panel and shipping your order back to you. Installation hardware (see the photo) is included.
Please note - additional 25% will be added to the total cost for velour/velvet and very thick fabrics. Old/used fabrics may be subject to additional charges, as well. See details below.
ATTENTION: Detailed address of our workshop will be sent to you after you purchase the listing. Please allow up to 6 hours for us to review your order details and send you all information regarding where and how your fabric should be shipped!
A flat Roman shade is a tailored, practical window treatment that controls light and provides privacy. Completely flat when lowered, this style works beautifully on its own or layered with tied-back curtains, drapery side panels, or swags.
Roman shades operate by pulling a cord that is threaded through a series of small rings on the back of the fabric. Each shade is attached to a mounting board and can be installed either inside the window frame or outside it—on or above the frame.
For guidance, please refer to the illustrations in this listing to see how to measure for an inside mount or an outside mount.
HOW TO MEASURE AND ORDER
Please follow these instructions step by step to successfully purchase the listing and receive your beautifully made shades without any delays:
STEP 1. Measure for your Roman Shades
Determine if you want your shades mount inside or outside your window frame. Refer to our illustrations for instructions or instructions below on how to measure for each option.
- INSIDE MOUNT:
Width: Measure the width of the window opening at the top, middle, and bottom. Use the smallest measurement.
Height: Measure the height of the window opening from the top of the frame to the bottom. Measure on the left, middle, and right side, using the longest measurement.
- OUTSIDE MOUNT:
Width: Decide how much you want the shades to overlap the window. Add at least 1-2 inches on each side to the window width.
Height: Measure from the desired starting point (above the window) to the bottom of where you want the shades to hang. Add extra length if you want more coverage.
Always double-check your measurements! Also consider any obstructions, like window handles or locks. Write down your measurements clearly to avoid confusion when ordering.
For multiple windows, measure each one individually, as sizes can vary.
If you’re unsure about measurements, consult with a professional or the retailer for guidance.
STEP 2. Pick and get your own fabric.
Here‘s how to calculate the approximate amount of fabric:
(please note - to calculate the exact yardage, contact us prior to purchasing the fabric)
Width of the shade + 5 inches = Fabric width
Length of the shade + 15 inches = Fabric length
(For example, if you measured your window and determined that the shade should be 37" wide x 43" long, you would need a piece of fabric measuring 42" wide x 58" long.)
If your fabric has a repeat pattern, add (Pattern length x 2) to the length of the fabric, calculated using the instructions above.
If width of your fabric does not allow for wide curtains, we can sew 2 or 3 panels together to create extra wide curtain panels for you.
However, since fabrics vary in width and pattern repeats, it’s always best to confirm your requirements before purchasing fabric. We recommend sending us a message for yardage calculations—we’re always happy to help.
Visit Spoonflower.com to explore a wide selection of beautiful patterns and fabrics. If you find a fabric you love, let us know—we can order any Spoonflower product for you with a 10% discount.
Please note that the pricing in this listing applies to sewing/constructing roman shades from new, unused fabrics. If you have existing textiles (such as old curtains, bedding, or other fabric items) that you’d like repurposed into shades, please message us with the details, and we’ll provide a custom quote.
Keep in mind that some fabrics—especially natural fibers like linen and cotton—may shrink after the first wash. For best results, we recommend pre-washing your fabric before sending it to us, or calculating the size of your shades with shrinkage in mind.
We also offer a curated selection of velvet, natural linen, and cotton fabrics that are perfect for custom window treatments. Be sure to check out our shop to see our available fabrics.
LINING
- Decide if you would like to add lining (material is provided by us) - we offer cotton privacy lining and blackout. Please follow this link to add lining to your shades: https://www.etsy.com/listing/1148581226
STEP 3. Place your order.
Select the sizes you need and add the product to your shopping cart. If you need more than one shade, you will be able to update the quantity in your shopping cart.
If you don’t see the exact size of shade you’re looking for, simply select the next largest dimension from the drop-down menu and add a note to your order with your precise measurements—we’ll customize it for you!
Example: If you need a shade that is 53" wide x 96" long, select the option for 55" wide x 100" long and include your exact dimensions in the order notes.
If your shades needs to be wider or longer than the sizes offered in our listing, please contact us—we’ll be happy to help.
Detailed address of our workshop will be sent to you after you purchase the listing.
STEP 4. Ship your fabric to our workshop in Maryland, US.
If you purchase your fabric online, you can have it shipped directly to our shop. If you‘re shipping it yourself, you can purchase the label on USPS website through its Click-N-Ship option. Please visit the USPS website at www.usps.com to purchase your shipping labels online.
Important - please send the package with signature request upon receiving. We are not responsible for lost packages if no signature received by our shop members!
We will send all remaining pieces (if any) of your fabric back to you with the product.
****
Normal PRODUCTION TIME - up to 3-4 weeks. If you need it sooner, please contact us to request a rush service.
Rush service fee is 20% of the order price.
Please note:
We do not accept returns on custom orders, unless there is an error on our part.
Please contact us with any questions or request.
Our shipments include insurance that covers the cost of the finished product only. If you would like to insure your fabric as well, additional insurance must be purchased to cover its value. Please contact to request additional insurance to cover the cost of the fabric. We cannot be held responsible for the cost of fabrics that are lost or damaged in transit by the shipping carrier.
All notions are included in the listing price. We just need fabric from you, and the rest is on us.
Our Linden Studio (former Linen Duet) sewing workshop is located in Maryland, US, and our team of seamstresses has years of experience sewing custom curtains and draperies for clients large and small.
Price includes sewing of ONE Roman Shade panel and shipping your order back to you. Installation hardware (see the photo) is included.
Please note - additional 25% will be added to the total cost for velour/velvet and very thick fabrics. Old/used fabrics may be subject to additional charges, as well. See details below.
ATTENTION: Detailed address of our workshop will be sent to you after you purchase the listing. Please allow up to 6 hours for us to review your order details and send you all information regarding where and how your fabric should be shipped!
A flat Roman shade is a tailored, practical window treatment that controls light and provides privacy. Completely flat when lowered, this style works beautifully on its own or layered with tied-back curtains, drapery side panels, or swags.
Roman shades operate by pulling a cord that is threaded through a series of small rings on the back of the fabric. Each shade is attached to a mounting board and can be installed either inside the window frame or outside it—on or above the frame.
For guidance, please refer to the illustrations in this listing to see how to measure for an inside mount or an outside mount.
HOW TO MEASURE AND ORDER
Please follow these instructions step by step to successfully purchase the listing and receive your beautifully made shades without any delays:
STEP 1. Measure for your Roman Shades
Determine if you want your shades mount inside or outside your window frame. Refer to our illustrations for instructions or instructions below on how to measure for each option.
- INSIDE MOUNT:
Width: Measure the width of the window opening at the top, middle, and bottom. Use the smallest measurement.
Height: Measure the height of the window opening from the top of the frame to the bottom. Measure on the left, middle, and right side, using the longest measurement.
- OUTSIDE MOUNT:
Width: Decide how much you want the shades to overlap the window. Add at least 1-2 inches on each side to the window width.
Height: Measure from the desired starting point (above the window) to the bottom of where you want the shades to hang. Add extra length if you want more coverage.
Always double-check your measurements! Also consider any obstructions, like window handles or locks. Write down your measurements clearly to avoid confusion when ordering.
For multiple windows, measure each one individually, as sizes can vary.
If you’re unsure about measurements, consult with a professional or the retailer for guidance.
STEP 2. Pick and get your own fabric.
Here‘s how to calculate the approximate amount of fabric:
(please note - to calculate the exact yardage, contact us prior to purchasing the fabric)
Width of the shade + 5 inches = Fabric width
Length of the shade + 15 inches = Fabric length
(For example, if you measured your window and determined that the shade should be 37" wide x 43" long, you would need a piece of fabric measuring 42" wide x 58" long.)
If your fabric has a repeat pattern, add (Pattern length x 2) to the length of the fabric, calculated using the instructions above.
If width of your fabric does not allow for wide curtains, we can sew 2 or 3 panels together to create extra wide curtain panels for you.
However, since fabrics vary in width and pattern repeats, it’s always best to confirm your requirements before purchasing fabric. We recommend sending us a message for yardage calculations—we’re always happy to help.
Visit Spoonflower.com to explore a wide selection of beautiful patterns and fabrics. If you find a fabric you love, let us know—we can order any Spoonflower product for you with a 10% discount.
Please note that the pricing in this listing applies to sewing/constructing roman shades from new, unused fabrics. If you have existing textiles (such as old curtains, bedding, or other fabric items) that you’d like repurposed into shades, please message us with the details, and we’ll provide a custom quote.
Keep in mind that some fabrics—especially natural fibers like linen and cotton—may shrink after the first wash. For best results, we recommend pre-washing your fabric before sending it to us, or calculating the size of your shades with shrinkage in mind.
We also offer a curated selection of velvet, natural linen, and cotton fabrics that are perfect for custom window treatments. Be sure to check out our shop to see our available fabrics.
LINING
- Decide if you would like to add lining (material is provided by us) - we offer cotton privacy lining and blackout. Please follow this link to add lining to your shades: https://www.etsy.com/listing/1148581226
STEP 3. Place your order.
Select the sizes you need and add the product to your shopping cart. If you need more than one shade, you will be able to update the quantity in your shopping cart.
If you don’t see the exact size of shade you’re looking for, simply select the next largest dimension from the drop-down menu and add a note to your order with your precise measurements—we’ll customize it for you!
Example: If you need a shade that is 53" wide x 96" long, select the option for 55" wide x 100" long and include your exact dimensions in the order notes.
If your shades needs to be wider or longer than the sizes offered in our listing, please contact us—we’ll be happy to help.
Detailed address of our workshop will be sent to you after you purchase the listing.
STEP 4. Ship your fabric to our workshop in Maryland, US.
If you purchase your fabric online, you can have it shipped directly to our shop. If you‘re shipping it yourself, you can purchase the label on USPS website through its Click-N-Ship option. Please visit the USPS website at www.usps.com to purchase your shipping labels online.
Important - please send the package with signature request upon receiving. We are not responsible for lost packages if no signature received by our shop members!
We will send all remaining pieces (if any) of your fabric back to you with the product.
****
Normal PRODUCTION TIME - up to 3-4 weeks. If you need it sooner, please contact us to request a rush service.
Rush service fee is 20% of the order price.
Please note:
We do not accept returns on custom orders, unless there is an error on our part.
Please contact us with any questions or request.
Our shipments include insurance that covers the cost of the finished product only. If you would like to insure your fabric as well, additional insurance must be purchased to cover its value. Please contact to request additional insurance to cover the cost of the fabric. We cannot be held responsible for the cost of fabrics that are lost or damaged in transit by the shipping carrier.
Recently viewed